Bionicdodge.Com
Welcome, Guest. Please login or register.
September 09, 2010, 06:44:22 AM

Login with username, password and session length
Search:     Advanced search
Be sure to vote for the next BionicDodge.com Ride of the month by clicking HERE
76659 Posts in 9444 Topics by 1627 Members
Latest Member: rj_hythloday
* Home Help Search Gallery Calendar Login Register
Bionicdodge.Com  |  Bionic Tech  |  Boost & Spray (Moderators: hemifever, Richie)  |  Topic: AUX injectors from paxton kit, convert to water/meth injection 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: AUX injectors from paxton kit, convert to water/meth injection  (Read 277 times)
Hemi345
Bionic Newbie

Offline Offline

Posts: 30



« on: January 01, 2010, 06:30:49 PM »

Instead of discarding these AUX injectors from the paxton kit,
 


Could I use them and the controler to hook up to the snow performance water/meth injection kit and use them that way?
Logged
Blwn00RT
Bionic Newbie

Offline Offline

Posts: 15


« Reply #1 on: January 02, 2010, 08:37:27 AM »

I want to say I have seen someone do this before but I believe on a 4.7 Dakota application. This was probably 8 or 9 months ago I read it on one of the Dodge forums. I to have thought the same thing for my 5.9 Paxton setup using those 2 aux injector ports as a meth injector.
Logged
Richie
Global Moderator
Bionic Master
***
Offline Offline

Posts: 1252



« Reply #2 on: January 02, 2010, 08:40:37 AM »

These injectors would get eaten up by the corosiveness of the meth but they would last a little whie. They do however make injectors specifically for alcohol/meth use that could directly replace these.
Logged

Big a** supercharged 4.7L HO, cammed, 72mm F&B throttle body, ROSS ceramic coated pistons, Billet H beam rods, 1st set of race prepped big valves heads W/ behive springs, Custom one off sheet metal intake, Modified Edelbrock Mustang intake elbow, ATI super dampner, 3,000 Edge racing billet stall converter, meth injected, SCT tuned, 39# injectors, 2 bar map, SSBOV, 180* T stat, True dual exhuast, Built tranny W/ deep trans pan,built transfer case, 275 60 R17 rubber.

97 Dakota JBA Headers,flowm
joeytvr
Site Sponsor
Bionic Senior
**
Offline Offline

Posts: 326



WWW
« Reply #3 on: January 28, 2010, 07:19:16 PM »

yeah, as stated above not a great idea for a few reasons
Logged

FUEL RAILS, X-BRACES in stock
COMMING SOON. REDISGNED TRACTION BARS, AND RACE PULLEYS.
thirsajohn
Bionic Newbie

Offline Offline

Posts: 15


« Reply #4 on: January 30, 2010, 02:46:08 PM »

Yeah man, no-one told me that Meth would rot the teeth too. But Hell I'm spinnin at high speeds! (YA-yah ya-yah) So nobody makes an injector that could handle that? I've got a kenne bell and often wondered. But everyone says..."Hell, it mounts on an air hat easy enough.
Logged
Richie
Global Moderator
Bionic Master
***
Offline Offline

Posts: 1252



« Reply #5 on: January 31, 2010, 10:45:55 AM »

Yes there are speciffic alchy/meth injectors out there.
Logged

Big a** supercharged 4.7L HO, cammed, 72mm F&B throttle body, ROSS ceramic coated pistons, Billet H beam rods, 1st set of race prepped big valves heads W/ behive springs, Custom one off sheet metal intake, Modified Edelbrock Mustang intake elbow, ATI super dampner, 3,000 Edge racing billet stall converter, meth injected, SCT tuned, 39# injectors, 2 bar map, SSBOV, 180* T stat, True dual exhuast, Built tranny W/ deep trans pan,built transfer case, 275 60 R17 rubber.

97 Dakota JBA Headers,flowm
Bionicdodge.Com
Advertisement
Thanks to the following sponsor
   

 Logged
Pages: [1] Go Up Print 
Bionicdodge.Com  |  Bionic Tech  |  Boost & Spray (Moderators: hemifever, Richie)  |  Topic: AUX injectors from paxton kit, convert to water/meth injection « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!