Bionicdodge.Com
Welcome, Guest. Please login or register.
January 17, 2018, 10:04:23 PM

Login with username, password and session length
Search:     Advanced search
   

94977 Posts in 11617 Topics by 2107 Members
Latest Member: Joejoe
* Home Help Search Gallery Calendar Login Register
Bionicdodge.Com  |  Bionic Tech  |  3.9/5.2/5.9 (Moderators: Lynn, 98Dak408)  |  Topic: M1 4 barrel intake? 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: 1 [2] Go Down Print
Author Topic: M1 4 barrel intake?  (Read 240 times)
JessyJ
Bionic Newbie

Offline Offline

Posts: 11


« Reply #15 on: January 11, 2018, 06:27:01 AM »

So the mopar pcm was 1 of the first things I did to the truck20 years ago, it was about $400 back then but well worth it. I took it off once and put the stock 1 back on to do a long road trip, boy it was like losing a cylinder or 2. But back to the fuel injectors and the fuel rail problem. I can make this work with a 1/2" spacer, but would rather not. I don,t want this getting too high because of the shaker hood setup. Can I get shorter injectors? And where can I source a different rail like 98Dak408 spoke of. I don,t know of anyone around here in British Columbia that can fab those up. Thanks for any suggetions.
Logged
magnumman
Site Owner
Bionic Supremacist
****
Offline Offline

Posts: 3754



WWW
« Reply #16 on: January 11, 2018, 05:01:02 PM »

So the mopar pcm was 1 of the first things I did to the truck20 years ago, it was about $400 back then but well worth it. I took it off once and put the stock 1 back on to do a long road trip, boy it was like losing a cylinder or 2. But back to the fuel injectors and the fuel rail problem. I can make this work with a 1/2" spacer, but would rather not. I don,t want this getting too high because of the shaker hood setup. Can I get shorter injectors? And where can I source a different rail like 98Dak408 spoke of. I don,t know of anyone around here in British Columbia that can fab those up. Thanks for any suggetions.

Send 98Dak408 a private message by clicking on his username, he makes the fuel rails and can hook you up with the injectors you need.
Logged

2001 Ram QC 1500: 360cid, 2wd, K+N CAI, SCT tune, Autolite AP3923\'s, MP 1.7 rollers, MP pushrods, SST rims, Hypertech coil, 10.2mm wires, Gibson super truck exhaust, 3\" magnaflow cat, modified Y pipe, modified kegger, 3.92 LSD, MSD-6, Transgo shift kit, 4.7L Injectors, Hipotek 52mm TB, (Currently under construction for a 408 build)

POS Chevy Trailblazer 4x4, the 4x4 is the only good part. This thing is a turd.

2007 Chrysler 300 2.7L "Wifes car" No complaints other than it slow. Seems like the more I beat on it the faster it goes.
JessyJ
Bionic Newbie

Offline Offline

Posts: 11


« Reply #17 on: January 13, 2018, 07:32:24 AM »

I like the fact that there is no plenum gasket. Just wondering if it use,s the same gaskets as the stosk kegger?


* IMG_20180107_143610.jpg (1079.88 KB, 3264x2448 - viewed 19 times.)
Logged
magnumman
Site Owner
Bionic Supremacist
****
Offline Offline

Posts: 3754



WWW
« Reply #18 on: January 13, 2018, 05:18:28 PM »

Yes they are the same gaskets. 

RockAuto has the gasket set for $12.71 which includes the plenum gasket that you don't need. 

You get 5% discount code from RockAuto for being a BionicDodge.com member, you can get it here ------>  http://www.bionicdodge.com/bionic/index.php?topic=13163.0
Logged

2001 Ram QC 1500: 360cid, 2wd, K+N CAI, SCT tune, Autolite AP3923\'s, MP 1.7 rollers, MP pushrods, SST rims, Hypertech coil, 10.2mm wires, Gibson super truck exhaust, 3\" magnaflow cat, modified Y pipe, modified kegger, 3.92 LSD, MSD-6, Transgo shift kit, 4.7L Injectors, Hipotek 52mm TB, (Currently under construction for a 408 build)

POS Chevy Trailblazer 4x4, the 4x4 is the only good part. This thing is a turd.

2007 Chrysler 300 2.7L "Wifes car" No complaints other than it slow. Seems like the more I beat on it the faster it goes.
98Dak408
Site Donor
Administrator
Bionic Wh0re!
*****
Offline Offline

Posts: 5122



WWW
« Reply #19 on: January 15, 2018, 01:06:49 PM »

If you don't want a lot of expense and difficulty, sell the 4-bbl TB you have and use a bored throttle body such as a 52mm http://stores.hi-potek.com/hipotek-52mm-performance-throttle-body-machine-modified-dodge-jeep-5-2l-5-9l-v8-magnum-1996-03/ or 53mm http://stores.hi-potek.com/hipotek-53mm-performance-throttle-body-machine-modified-dodge-jeep-5-2l-5-9l-v8-magnum-1996-03/

 
Logged

JessyJ
Bionic Newbie

Offline Offline

Posts: 11


« Reply #20 on: Today at 08:21:12 AM »

What expences do you think I will encounter? fuel rails, injectors am I missing something? I want to get this working. How much $$ are we talking for the parts. I,m pretty sure I will get the cables part figured out. Thanks for your help on this.
Logged
Bionicdodge.Com
Advertisement
Thanks to the following sponsor
   

 Logged
Pages: 1 [2] Go Up Print 
Bionicdodge.Com  |  Bionic Tech  |  3.9/5.2/5.9 (Moderators: Lynn, 98Dak408)  |  Topic: M1 4 barrel intake? « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!