Bionicdodge.Com
Welcome, Guest. Please login or register.
January 24, 2021, 06:27:37 AM

Login with username, password and session length
Search:     Advanced search
   

99330 Posts in 14285 Topics by 2153 Members
Latest Member: RedWolf
* Home Help Search Gallery Calendar Login Register
Bionicdodge.Com  |  Bionic Tech  |  Everything Else Technical (Moderator: northwest_5.9)  |  Topic: 99 Dakota heater box parts 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: 99 Dakota heater box parts  (Read 457 times)
donram360
Administrator
Bionic Supremacist
****
Offline Offline

Posts: 2990


« on: December 04, 2020, 08:34:04 AM »

Anyone have any spares laying around? I need the pin that the blend door pivots on and is the "opener/closer" for the blend door, attaches to the arm from the vac diaphragm, don't feel like pulling a whole heater box from a junkyard just to get that out
Logged
donram360
Administrator
Bionic Supremacist
****
Offline Offline

Posts: 2990


« Reply #1 on: December 11, 2020, 04:05:57 PM »

Nobody?
Was hoping SOMEONE would say something here, it's been a while since my post but I have been well under the weather for a couple of weeks now (not covid, I went and got tested) but worse than what my wife and son went thru and they both had it and are back to work. I'm not.
Nevermind the side story, but I had hoped that maybe my being down might buy me some time/response.
C'mon I have to get this thing back together, help!
« Last Edit: December 11, 2020, 04:07:02 PM by donram360 » Logged
magnumman
Site Owner
Bionic Supremacist
****
Offline Offline

Posts: 4438



WWW
« Reply #2 on: December 12, 2020, 08:15:32 PM »

I don't have any.  Is there a hardware store or hobby shop that has thin brass or steel dowels that you can make work?
Logged

2001 Ram QC 1500: 360cid, 2wd, K+N CAI, SCT tune, Autolite AP3923\'s, MP 1.7 rollers, MP pushrods, SST rims, Hypertech coil, 10.2mm wires, Gibson super truck exhaust, 3\" magnaflow cat, modified Y pipe, modified kegger, 3.92 LSD, MSD-6, Transgo shift kit, 4.7L Injectors, Hipotek 52mm TB, (Currently under construction for a 408 build)

POS Chevy Trailblazer 4x4, the 4x4 is the only good part. This is my Son's truck now.

2007 Chrysler 300 2.7L "Wifes car" No complaints other than it slow.

2012 Ram 5.7 Hemi Outdoorsman, 4x4, LSD, Air Bag Suspension.
donram360
Administrator
Bionic Supremacist
****
Offline Offline

Posts: 2990


« Reply #3 on: December 15, 2020, 02:00:35 PM »

yeah that's next step.... tested neg for covid, but I have been down with something myself......DR ("P.A.") thinks a bad upper respiratory infection, have had those before, have never been like this... I'm thinking more like walking pneumonia.

just worked my 1st day this month today and was totally exhausted/wiped out by 9:30 this morning.......

on the truck I got a 1/4" metal dowel rod and 1/8"X1/2" wide piece of flat stock, gonna combine the 2 and make something I guess..... aggravating for such a small part that I have to resort to that. truck has been apart since Turkey day partly because of what's broke and partly from me being under the weather......
Logged
donram360
Administrator
Bionic Supremacist
****
Offline Offline

Posts: 2990


« Reply #4 on: December 26, 2020, 11:29:15 AM »

ended up making what I needed.,..,... 1/4" steel dowel rod 4" long, a piece of 1/8X1/2 wide steel bar stock 1-1/2" long and the shank of a nail. welded it together and filed down what needed to be, spun the 1/4" rod in a drill press to do that/ and put  it into the vise to hand file down the flats for the actuator arm that snaps onto this hinge pin.
Logged
Bionicdodge.Com
Advertisement
Thanks to the following sponsor
   

 Logged
Pages: [1] Go Up Print 
Bionicdodge.Com  |  Bionic Tech  |  Everything Else Technical (Moderator: northwest_5.9)  |  Topic: 99 Dakota heater box parts « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!